Philips TC10 ECG Printer Paper Feed Roller Assembly - 12.5cm Long Black Rubber

Philips TC10 ECG Printer

Philips TC10 ECG Printer Paper Feed Roller Assembly - 12.5cm Long Black Rubber

► Product Overview

This product is a printer paper feed roller assembly specifically designed for the Philips TC10 ECG machine, conforming to original specifications. As seen in the images, the assembly features a long, black plastic frame with a high-elasticity black rubber foam layer wrapped around its center. The length is approximately 12.5 cm, with a diameter of about 1 cm. At one end of the roller, there is a white plastic drive gear, which precisely meshes with the internal motor to ensure the ECG paper is fed smoothly and at a constant speed.

Precautions

1.Handle with Care: The rubber layer is relatively fragile. Do not squeeze or pull it forcefully with your hands to prevent deformation.

2.Keep Clean: Before installation, it is recommended to gently wipe the surface of the roller with a dry cloth to avoid dust affecting print quality.

3.Avoid Direct Sunlight: Unused spare parts should be stored in a cool, dry place, avoiding direct sunlight to prevent the rubber from aging and hardening.

4.Professional Operation: If you are not familiar with the internal structure, it is recommended to replace it under the guidance of a professional technician.

► Specification

► Detailed Photos

Tags： Philips TC10 ECG, Printer Paper Feed Roller, 12.5cm Long, White Drive Gear,

Copyright statement:If not specified, the articles on this site are all PMR Med originals. Please indicate the source and attach the link to the Philips TC10 ECG Printer Paper Feed Roller Assembly - 12.5cm Long Black Rubber article for reprinting.